Waxing can Pro Wax 100 - white, 400 ml

Description

Can wax melter Pro Wax 100 (wax heater)

 

It's no secret that women's beauty requires a more careful approach to maintaining it. For example, a woman has to use a razor more often for delicate skin areas, which irritates the skin and makes hair grow even faster. Waxing and shugaring are considered to be more effective shaving methods.

 

After such procedures, growing hair will not bother you for at least 2 weeks, the main thing is to remember to take proper care of your skin. It is also important to choose a real helper like the Pro-Wax 100 waxer. The presented model of the can waxer is suitable for home and salon use.

 

Characteristics of the Pro-Wax 100 wax melter:

 

Device size: 18.5 * 18.5 * 14.5 cm;

The size of the additional capacity: 10.5 * 6.5 cm;

Additional capacity: 400 ml;

Material: plastic (wax melting pot with lid), aluminum (container);

Power supply type: from a power outlet;

Rated power: 100 W;

Rated voltage: 110-240 V 50/60 Hz;

Functions: melting of hair removal material, temperature control and maintenance;

Heating temperature: 35 to 100 °C;

Material heating time: approx. 15-20 min;

Package contents: voskoplav, additional container, 1.5 m cable, English instructions, box;

Total weight: 600 г.

 

The right type of material for the wax melter:

Wax (canned, tableted, granular);

Sugar paste for shugaring.

 

Diagram of the device:

The OFF button;

Power button (ON);

The temperature designation is 50 degrees (MED);

Temperature divisions equal to 10 degrees;

Temperature designation is 100 degrees (HI);

 

Use of a wax melter:

 

Place the waxing device on a flat surface near where the hair removal procedure will be performed;

Place the plastic «collar» around the rim of the metal container/jar of wax;

Place the container/jar in the wax melter, then add the wax/sugar paste;

Connect the device to the network (the red indicator lights up);

Turn the control knob to HI, wait until the mass is evenly melted (about 15-20 minutes). To speed up the process, put the lid on the steamer;

Turn the control knob to MED (50 °C, see point 3 in the diagram) - the optimal temperature maintenance mode is activated. If necessary, set a different temperature;

Start the hair removal procedure;

If you run out of wax, carefully remove the container/jar using the holder;

After completing the work, turn the control knob to OFF (see point 2 in the diagram), disconnect the device from the mains;

Clean the metal container after the wax melter has cooled down.

Warning. Blinking of the red indicator light during the wax melter use is normal: when the required temperature is reached, the light turns off, and when the device cools down, it lights up again.

 

Cleaning the metal container of the wax melter:

 

Disconnect the device from the power supply;

Wait for the mass to cool completely;

Empty the container by removing the already hardened mass from it;

Turn on the wax melter again for a couple of minutes and turn it off if you cannot lift the mass from the bottom of the container;

Remove any residue and other dirt with a damp cloth or lightly soaped cloth.

 

Precautions when using a wax melter:

 

The voskoplav should be placed on a flat surface and not on the edge of the table;

Do not move the waxer during the epilation process;

Do not turn on the device if the wax tank is empty;

To avoid burns, test the heated material on the back of your hand or on another small area of skin. Then reduce or increase the temperature to a more suitable setting;

Do not use water when cleaning the container.